TMP1105 NKIA5904 Complex Bearings 20X37X23mm Needle Roller Angular Contact Ball Bearing NATA5904 NATA 5974904

★★★★★ 4.2 108 Bewertungen

€12.79
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Verkauft und versendet von www.mayazahira.com
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€12.79
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Wie möchten Sie Ihren Artikel erhalten?
Die ersten 30 Tage sind kostenlos! Wählen Sie den Tarif an der Kasse.
Versand
Ankunft 25.11.
Kostenlos
Abholung
In der Nähe prüfen
Lieferung
Nicht verfügbar

Verkauft und versendet von www.mayazahira.com
30 Tage kostenlose Rückgabe Details

Produktdetails

Artikelnummer 210850230 Erscheinungsdatum 2026/04/04 Listenpreis €12.79 Modellnummer 210850230
Kategorie

BearingsBearingsNeedle roller / angular contact ball bearings Needle roller / angular contact ball bearings combine a radial needle roller bearing with an angular contact ball bearing. The radial loads are accommodated exclusively by the needle roller bearing and the axial loads exclusively by the angular contact ball bearing.These low cross section bearings can operate at high speeds and accommodate heavy radial and light axial loads. Supplies these bearings without seals in the following two series:NKIA series ( fig. 1 ), bearings can accommodate axial loads in one directionNKIB series ( fig. 2 ), bearings can accommodate axial loads in both directionsBearings in both series are separable i.e. the inner ring can be mounted separately from the outer ring, rolling element and cage assemblies. However, the inner rings in the NKIB series are not interchangeable with those from another seemingly identical bearing. Therefore, the bearings must be kept together as supplied.Depending on the application, needle roller / angular contact ball bearings can be grease or oil lubricated. In the case of grease lubrication, both the needle roller and angular contact ball bearing should be filled with the same lubricant prior to mounting.NKIA seriesNeedle roller / angular contact ball bearings in the NKIA 59 series ( fig. 1 ) can accommodate axial loads in one direction and can, therefore, locate the shaft in one direction only. For short shafts and where changes in length as a result of thermal expansion are relatively minor, two bearings in the NKIA 59 series can be mounted back-to-back ( fig. 3 ).NKIB seriesNeedle roller / angular contact ball bearings in the NKIB 59 series ( fig. 2 ) can locate a shaft in both directions. Depending on the bearing size, the axial clearance is between 0.08 and 0.25 mm. To facilitate mounting, the bearing has a two-piece inner ring. When mounting the inner ring, it is important that

  • Bearings
Brand Name CASNKTTJ
Unit Count 1.0 Count
Item Weight 555 Grams
Manufacturer CASNKTTJ

Korrektur der Produktinformationen

Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.

Korrekturanfrage

Kundenbewertungen

4.2 von 5
★★★★★
108 Bewertungen | 44 Rezensionen
So wird die Artikelbewertung berechnet
Alle Bewertungen anzeigen
5 Sterne
78% (84)
4 Sterne
6% (6)
3 Sterne
3% (3)
2 Sterne
2% (2)
1 Stern
11% (12)
Sortieren nach

Für dieses Produkt liegen derzeit keine schriftlichen Bewertungen vor.